• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar
  • Skip to footer

Lyons Roofing

Roof Replacement and Repair Contractor Louisville, KY and Indiana

CALL TODAY
Louisville: (502) 689-0338
Indiana: (812) 294-3595
  • Home
  • About
    • History
    • Staff
    • Roofing Brochure
  • Services
    • Roofing
    • Gutters
    • Commercial
  • Testimonials
  • Gallery
  • Bill Pay
  • Blog
  • Contact

When to replace your roof?

October 7, 2016 by Kyle Lyons Leave a Comment

 

So here it is, the start of the halloween season. Most schools are back in business and parents are breathing that sigh of relief, no kids at home to worry about messing up the house. Is it to late to replace your roof ?

 

when to replace your roof

 

The question is, did you wait to long to get the roof replaced. Is there still time to make sure your home is ready for the nasty winter months ahead? Well rest assured there is still time. You do not have to worry about those nasty ice dams running your Christmas.

 

Spring, summer and fall all provide good seasons to replace your roof, giving you plenty of time to get a good quality seal on your roof to prevent any blown off shingles.

 

So when is the best time to replace your roof? Well, depending on your location you can replace it year around. For those of you around the Louisville, Kentucky and Southern Indiana areas, we have a different story to tell you.

 

Replace your roof in the Midwest.

 

There are many great things about the Louisville, Kentucky area. We have all of the seasons, Kentucky Derby and some of the best Bourbon a man (or woman) could ask for. The downfall to all of that of course are the seasons. Roofing in the wintertime can be a risky endeavor.

Kentucky_Derby_2014-0214

Installing shingles below freezing can create multiple problems and are against manufacturers recommendations.

 

How cold can you go? Most shingle manufacturers do not want you to install shingles at a temperature below 40 degrees. There are many reasons for this; shingles installed below this temperature do not have the proper time to seal. Some roofing companies will guarantee blow-offs until spring has sprung and the shingles are warmed up enough to seal. But, Shingle Manufacturers will not warranty this and if you pick the wrong contractor, you could be stuck with a nasty repair bill.

 

Shingles installed at or around a freezing temperature also have the tendency to crack. If your home has any valleys, then you are more than likely asking for a leak.

 

valley instal

 

Best time to replace your roof.

 

We have discussed the downfall of replacing your roof in the winter. So if winter is the riskiest, what season is the best?

 

Roofing in the spring, summer and early fall can provide you plenty of time for your roof to seal. With average temperatures above 50 degrees and the sun shining, your roof will heat up and lay down sealing tighter than a Ziploc bag.


DSC_4756

Warm temperatures and sunshine always provide for the best time to replace your roof. But, that doesn’t mean you should avoid thinking about it during the winter. If you have a problem or a leak, call your local roofing contractor and get an inspection, or do one yourself. We all know; when it comes to the weather in the Ohio valley; if you do not like it, wait 5 minutes. Winter in our area can still give you a good few days in a row to have your roof replaced and keep you happy and dry for the remainder of the winter.

 

Make sure, regardless of the time of year, you look over your warranty provided by both the manufacturer and Roofing contractor to make sure you are not inviting more problems than you may already have!

 

Filed Under: Blog, Roofing Tagged With: Kentucky Roofs, Louisville roofing contractors, roof mainenance, roof replacement, roofing contractor

4 Steps to a Roofing Contractor

October 3, 2016 by Dee Dee Lyons Leave a Comment

Your roof is one of the most important aspects of your home. Thats why picking the right roofing contractor is so important.

Charleston Indiana New Roof for McDonner

It is not unusual for a new roof to be one of your most significant maintenance investments. This is because your home’s roof will protect you from rain, storms, winds, and even hail. However, over time, damage can occur if it’s not kept up. Keeping your roof in good shape means avoiding leaks, missing shingles, missing tiles, and the growth of mold.

When it’s time to hire a roofing contractor to replace, fix, or maintain your roof, there are a few things you should do to select the best one for the job:

  1. Ask for Referrals:  

    Friends, family. and neighbors are often your best resources when seeking a roofing contractor. More than likely, someone you know has had roofing work done recently and knows who to call.  Your friends and family can tell you:

    • Did the roofing contractor complete the work on time.
    • Did the roofing contractor stay within their bidding budget.
    • Was the customer satisfied with the work.
  2. Check Their Licenses and Certifications:  

    Make sure that they are actually licensed and certified to work in your Kentucky or Indiana. With their licenses and certifications in order, you know they are more likely to be trustworthy and dependable. Also verify the roofer has insurance and is bonded.

  3. Evaluate the Bids:  

    Look at each bid and pick at least two that you like. Don’t necessarily pick the lowest priced bid. Select the bid that covers the most work, has the best timelines, has the most details, and is the most professional. After you pick at least two bids you can move on to the interviewing process.

  4. Hire a Roofing Contractor:  

    Finally, after reviewing and comparing your finalists, make your selection based on your research and bids. In the end, just make sure the Kentucky Roofing Contractor you choose is established in Kentucky or Indiana and has a record of good service to your community.

Is there anything else you would recommend?

Filed Under: Blog, Roofing Tagged With: ky, roof repair, roofing, roofing contractor, roofing Louisville

How to Finance your Roof Replacement

September 19, 2016 by Kyle Lyons Leave a Comment

We at Lyons Roofing understand that replacing your roof can be costly. To provide our customers with other options,  we can help finance your roof replacement through our financing partner, Service finance.

According to Remodeling Magazine’s annual Cost vs. Value study, the average cost of replacing a roof is $14,446.

 

Throwing-money-RF

We know most people don’t have that kind of money laying around, if you do. You more than likely want to spend it in other ways or even save it for a rainy day. We also know it is hard for you to ignore the drip in your kitchen ceiling or the old shingles that are the talk of the neighborhood association.

Fortunately, homeowners have a number of financing options that won’t require tapping into the kids’ college funds

If you are in the process of receiving roof estimates, contact The Lyons Roofing Company and we can help walk you through the financing options and help you get qualified.

Picking the plan that’s right for you can be done in a quick, simple application process. It can be completed online with the help of one of our sales representatives.

Contact The Lyons Roofing Company to help finance your roof replacement

Within minutes you will know if you are qualified and The Lyons Roofing Company can get you back to normal. We know the process can be difficult and our goal is to make the process as simple as possible.

 

finance your roof replacement

 

Should you need more information or have questions, feel free to contact our office in Indiana at 812-294-3595 or Louisville, KY at 502-689-0338.

 

Filed Under: Blog, Commercial, Gutters, Roofing, Siding Tagged With: financing, Louisville roofing contractors, roof replacement, roof replacement financing, roofing companies

Chimney Leak

August 17, 2016 by Kyle Lyons Leave a Comment

Rain pouring into your living room or den can be an unwanted experience? So what if you have a fireplace in your living area and you get the unsightly brown spots or water dripping on the floor or running down after every rain.

 

chimney leak

 

Chimneys


Chimneys and fireplaces are beautiful and relaxing. If you are fortunate enough to have one in your living room then you can relax with a good book and listen to the crackle of a warm fire on a cold winter night. Or even better, maybe you have one in your bedroom and can set the mood with your spouse and a nice glass of wine!

chimney-flashing

The provide dimension to the outside of your home and give the classic America feel to most homes. But, if flashing is installed improperly or sealant begins to break down you can find yourself using the wine glasses to catch water and that romantic mood can quickly turn into a nightmare!

 

Problems with chimneys

 

What can cause these leaks? First, your flashing could be the biggest problem. So what if you have a brick fireplace, then check the sealant along your counter flashing. If it is broken or cracked, that is more than likely your problem. If you have siding on your home, check the corners of the chimney and flashing, the flashing wraps around the corner and any sealant can break down over time.

 

chimney brick

Some lesser known problems can include sealing of your brick. Over time your brick can become porous and create a sponge effect when it rains. Regardless of how good your chimneys flashing job is, it could still leak!

 

OLYMPUS DIGITAL CAMERA

If your chimney is any more than four foot wide you more than likely need to have a saddle installed to divert the water around each side of the chimney instead of directly in the back.

 

Check with your local professional roofing contractor and have an inspection done if you think you have any problems. It is better to make sure al of these problems are addressed during replacement but can be easily addressed if needed after your roof has been replaced.

Filed Under: Blog, Roofing Tagged With: Kentucky Roofs, Louisville roofing contractors, roof leaks, roof mainenance, roof replacement

Can roof flashing mean roof leak?

August 15, 2016 by Kyle Lyons Leave a Comment

roof flashing

Roof flashing has many jobs on your home. There can be many different styles of flashing on your home, from drip edge to step and counter flashing, pan flashing, pipe collars and vents, both HVAC and plumbing.

 

It is more than likely that if your roof has not been properly maintained and inspected over the years, you could be in trouble and have a potential leak just waiting to strike.

 

Different styles of roof flashing

 

Drip edge:

 Drip edge

Drip edge is your first and one of the most important flashings on your roof. It does not look like much but without it you will have a lot of roof decking to replace during your next roof replacement

The purpose of drip edge is to prevent the roll over of water to the decking. This small piece of metal, installed on the base and the rakes of the roof prevents water from being blown on to the decking or water rolling over the edges of the shingles and working back to the roof deck.

 

Step Flashing

step flashing 

Step Flashing is very important. Not everyone has this style roof flashing on their home. Step flashing is used in areas that either walls for another story on your home or a chimney would protrude out of your roof.

 

This flashing normally never seen goes between the shingles and behind either wood or vinyl siding or counter flashing on brick homes. This flashing allows water to run below the shingle on top and run off onto the shingles below. One important thing to note is that this flashing should never be nailed down towards the bottom. This will likely create a leak.

 

Counter Flashing

 roof counter flashing

Counter flashing is a roof flashing used on brick homes or in areas of brick chimneys protruding out of the roof. This flashing is used to protect the step flashing below and gives a decorative look to the brick areas on your roof.

 

Now, keep in mind there are different ways counter flashing can be installed on your home. Neither being wrong, counter flashing can be nailed to the brick with a stiffener bend along the top and front and sealed with silicone caulking. Secondly, some contractors prefer to cut the flashing into the mortar joints and re-tuck the mortar leaving a more long term flashing. Both are normal practice but the later can make it a little harder the change out if your metal ever needs replacement.

 

 

Pan Flashing

 pan flashing

Pan flashing, very similar to step flashing is installed on the front area of any dormers or chimneys that are protruding out of your roof. This flashing is meant to protect the area where shingles are cut to match up to the wall or chimney. This flashing will be hidden behind siding but visible on the roof. On brick homes you will see both the roof and wall faces of this siding matching up with the counter flashing that is installed along the walls.

 

This flashing will be nailed on both the wall and roof side. Like counter flashing can be cut in the mortar or laid on top and sealed on both sides. All nail heads on bot roof and wall side should be sealed with silicone.

 

Make sure that when your pan flashing is installed that they include stiffener bends on both sides to ensure your metal does not warp and wrinkle due to temperature changes.

 

Pipe Collars

 

Pipe Collars are in a league of their own. Depending on plumbing or HVAC needs you could have anywhere from one to who knows how many! Your pipe collars provide protection from and pipes or heat stacks that protrude from your roof.

 

These flashings are installed easily but do require the most maintenance. Pipe collars should be checked at least every year to ensure the rubber seal around the pipe itself has not started to dry rot. Pipe collars can be replaced during your roofs life cycle but normally a small bead of silicone around the rubber seal can give you a few more years of life.

 

There are newer versions of pipe collars that provide a lifetime guarantee these can be found at your local Lowes or Home Depot.

 

Conclusion

 

Regardless of what kind of roof flashing you have on your roof, you should have it checked at a minimum yearly to make sure there are no small potential problems that will turn into a big leak. Contact your local professional roofing contractor to schedule an inspection.

Filed Under: Blog, Roofing Tagged With: Kentucky Roofs, Louisville roofing contractors, roof mainenance, roof replacement

  • Page 1
  • Page 2
  • Page 3
  • Interim pages omitted …
  • Page 6
  • Go to Next Page »

Free Estimate

"*" indicates required fields

  • Facebook
  • LinkedIn
Financing Options for your New Roof or Roof Repair

Latest Articles, Ideas, DIY, and More

  • Memorial for Terry Lyons
  • Counter or Brick Flashing for the DIY in you
  • Decorate your roof for Halloween
  • How to replace a damaged shingle
  • When to replace your roof?

Connect

  • Facebook
  • LinkedIn

Proudly Serving

Indiana and Kentucky
Louisville, Kentucky, Southern Indiana and surrounding areas.
Kentucky Counties include:
Jefferson • Oldham • Trimble • Henry • Carroll • Shelby • Spencer • Bullitt • Nelson • Franklin • Hardin
Indiana City/Counties include:
Clark • Sellersburg • New Albany • Clarksville • Scott • Jefferson • Jeffersonville • Switzerland • Jackson • Washington • Crawford • Lawerence • Orange • Floyd • Harrison • Spencer

Contact Us

Lyons Roofing Company
Address:
4317 Murphy Rd., Memphis, IN 47143
Phone Indiana: 812-294-3595
Phone Louisville: 502-689-0338
Email: customer.service@lyonsroofingco.com

Copyright © 2025 · Lyons Roofing Company · Designed and Hosted by Coastal Waters Creative - Local Business Websites and Digital Marketing